Reconnecting - Canon EOS 2000D Instruction Manual

Reconnecting

The camera can reconnect to a camera for which connection settings
have been registered.
If Wi-Fi settings are cleared (p.115) or the connection setting is deleted
(p.114) on the target camera, reconnection will no longer be possible. Select
[Review/change settings] and change the settings (p.112).
54
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [z].
2
Select [z] (Transfer images

between cameras) and press <0>.
Select [Connect].
3
When settings for multiple connection

destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Select [Connect] and press <0>.

On the confirmation dialog, select

[OK].
Perform the reconnection procedure

on the target camera as well.

The images on the card are displayed
and the images to send can be
selected.
By default, settings are named after

the nickname of the target camera.