Reconnecting - Canon EOS 2000D Instruction Manual

Reconnecting

The camera can reconnect to a Web service for which connection
settings have been registered. The connection to the access point only
has to be established once. You do not need to establish a new
connection for each Web service.
108
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select [m].
2
Select [m] (Upload to Web service)

and press <0>.
Select a Web service.
3
Select a Web service and press

<0>.

When the [Send to] screen (p.103) is
displayed, select a destination and go
to step 4.
Select [Connect].
4
When settings for multiple connection

destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Select [Connect] and press <0>.

On the confirmation dialog, select [OK].

 The camera will reconnect to the Web
service.