Checking, Changing, Or Deleting Connection Settings - Canon EOS 2000D Instruction Manual

Checking, Changing, or Deleting Connection Settings

Check, change, or delete connection settings saved on the camera.
Terminate the connection, then perform the operation.
112
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi/NFC]

to [Enable], then select [Wi-Fi
function].
Select the item to check settings
2
for.
Select an item, then press <0>.

When you select an item for which no

setting is saved, the connection
settings screen is displayed.
When you select [m], a screen to

select a Web service is displayed.
The same settings are displayed for
any Web service selected.
Select [Review/change settings].
3
Select the connection destination on

the [Choose set.] screen, select
[Review/change settings], then
press <0>.