Connect And Disconnect; Connect; Disconnect - TRENDnet TBW-103UB User Manual

6.7 Connect and Disconnect

Connect

1. Select a remote device and double click it to browse its services.
Bluetooth passkey may be asked if security level of either side is set to high and
they are not paired devices.
After service browsing, the services the remote device supports are highlighted
by changing the color of the service buttons on the top of the main window.
2. Single click one of the service button to connect.
After connection is setup, the remote device and the service button will turn
green.
Note: Users can right click the remote device icon or the service button to pop up
operation menu for connection.

Disconnect

Method 1: Select the remote device, right click the service button. On the popup
menu, select Disconnect.
Method 2: Right click the device icon. On the pop-up menu, select Disconnect |
(the connection you want to disconnect).
Method 3: For FTP and Synchronization connection, close the operation window,
the connection will be disconnected.
Method 4: Disconnect from the remote device directly.
Method 5: If the local Bluetooth device is removed or the remote device is powered
off, all the connections will be disconnected. If the remote device moves
out of the radio range, all the connections with the remote device will be
disconnected in 1 minute.
.
16
TBW-103UB User's Guide