4.3.2 Encryption Setting:
Press "WEP Encryption Key Setting" to enter the "WEP Key Setting" page
shown as Figure 4-3.
-
Select the "Open System", "Shared Key" mode or "Auto" from the
"authentication Mode" drop down menu.
-
Press the "Change" button to modify the contents of "WEP Key setting", when
it is finished, press "Apply" to save it. The button "Change" and "Apply" is
alternately shown on the same position.
-
Select which key length 64,128 or 256 bits will be modified or used by "Key
Length" item.
-
Select which key set will be use by the field of "Default Key ID"
Modify the 4 sets key depending on the selected key length on the field of "Key
-
Value". The key value is used the hexadecimal format.
Figure 4-2
8
TBW-103UB User's Guide