Installing The Mount; Accessories (Optional) - 70mai Omni X200 User Manual

Installing the mount:

1. Align the microphone with the big locating point on the
right of the mount, and then the dash cam is inserted to the
mount.
Locating point
Microphone
2. Hold the dash cam and screw
counterclockwise until the microphone is
aligned with the big locating point on the
left of the mount, and then the dash cam is
tightened up with the mount.
Downloading 70mai app
This product needs to be used in conjunction
with the 70mai app. You can download and
install the app by scanning the QR code or
finding "70mai" in the app store.
Note: Android 5.0 & iOS 11.0 or above is required to
connect to the dash cam's Wi-Fi hotspot with a mobile
phone.
User guide
For more on product functions and FAQs,
please see the user guide by scanning the QR
code.

Accessories (optional)

This product can also be used with the 70mai
4G Hardwire Kit. Scan the QR code to obtain
the user guide for the 70mai 4G Hardwire Kit.
Precautions
Before using the dash cam, please read all the precautions
and the user guide to ensure correct and safe use.
The dash cam is intended to assist drivers with the
●
purpose of recording the environment outside the
vehicle. The dash cam does not guarantee the user's
driving safety. We shall not be held liable for any
accident, damage, or loss of information caused by
operating the dash cam while driving.
Due to differences in vehicle conditions, driving style,
●
driving environment, etc., some functions may not
work properly. A power failure, usage in environments
outside the normal operating temperature or humidity
range, or a collision may cause the dash cam to function
abnormally. There is no guarantee that this dash cam
will function normally under all circumstances. Videos
recorded by this dash cam are for reference only.