Ryobi RY405011 Operator's Manual page 13

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Wear Eye, Hearing, and
Head Protection
Wet Conditions Alert
Rain Symbol
Operate With Two Hands
One Handed
Kickback
Bar Nose Contact
Wear Gloves
Wear Safety Footwear
Oil Indicator
Recycle Symbol
V
Volts
Direct Current
SYMBOLS
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Wear eye protection with side shields marked to comply with
ANSI Z87.1 as well as hearing and head protection when operat-
ing this equipment.
Do not expose battery, battery compartment, or electronic
components to rain, water, or liquids. Do not charge battery or
expose product to rain or damp locations.
Do not expose to rain.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
DANGER! BEWARE OF KICKBACK.
Avoid bar nose contact. Tip contact may cause the
guide bar to move suddenly upward and backward,
which may cause serious injury.
Wear non-slip, heavy-duty protective gloves when handling the
chainsaw.
Wear non-slip safety footwear when using this equipment.
Pour bar and chain lubricant into oil tank where indicated. Do not
use any other fluids.
This product uses lithium-ion batteries. Local, state or federal laws
may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling
and/or disposal options.
Voltage
Type or a characteristic of current
7 - English
DESIGNATION/EXPLANATION