Table of Contents
Advertisement
working. The washing phase starts only after this
procedure is completed. The procedure will be
repeated periodically.
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase. Fill the rinse aid dispenser when the lens (A) is clear.
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
1
2
1
2
A
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
A
B
9
Advertisement
Table of Contents
