Notes On The Operating Instructions; Symbols Used - Siemens Gigaset E450 SIM Manual

Notes on the operating instructions

shall not apply if and to the extent liability is
mandatory under the applicable law, e.g.
according to product liability law or in the
event of intentional misconduct, severe
negligence, personal injury, damage to
parts of the human body or to personal
health, or in case of violations of
conventional obligations. However, the
claims for damages related to violation of
conventional obligations shall be limited to
predictable damages, representative of
such conventions, as long as there is no
intention or severe negligence, personal
injury, damage to parts of the human body
or to personal health, according to the
product liability law.)
u
The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
u
Insofar as no Guarantee default exists,
Gigaset Communications reserves the
right to charge the customer for
replacement or repair.
u
The above provisions do not imply a
change in the burden of proof to the
detriment of the customer.
To invoke this Guarantee, please contact the
Gigaset Communications telephone service.
The relevant number is to be found in the
accompanying user guide.
48
Notes on the
operating instructions
This section explains the meaning of cer-
tain symbols and typographical conven-
tions that are used in this user guide.

Symbols used

/
Copy Entry Copy List
Select one of the two menu
functions specified.
~
Enter digits or letters.
The display keys' current func-
§Save§
tions are shown reverse high-
lighted in the bottom display
line. Press the display key
below to launch the function.
q
Press the top or the bottom of
the control key: scroll up or
down.
r
Press the right or left of the
control key: e.g. select setting.
c / Q / * etc.
Press the corresponding key
on the handset.
(example)