Trouble-Shooting - Panasonic NI-FS780 Operating Instructions Manual

Trouble-shooting

Problem
The power plug has not been plugged in.
The power switch is " O ".
No heating The powerful steam indicator light is flashing.
The product is abnormal.
The automatic heating function or the auto
power-off function is not disabled (when the
indicator lights up in green).
The steam button is not pressed down.
There is no water in the water tank.
No steam
The temperature is set to "LOW".
The powerful steam indicator light is flashing.
Noise will be heard when
This sound comes from the pipe hitting the tank. It's normal.
the product is shaken
16
Causes Solution
Insert the power plug.
Turn on the iron with the power switch
" I ".
It indicates that the product is heating.
Please wait until the indicator lights up
in red.
Have your product repaired by the specified
service agent.
Press the " SET (台灣:設定) "
disable the automatic heating function or
the auto power-off function.
Press down the steam
Use the cup to add water to the
" MAX(台灣:滿水) " position on the tank
window.
Please set the temperature to "MED" or
"HIGH". (Refer to Pages 10-11 for details.)
It indicates that the product is heating.
Please wait until the indicator lights up
in red.
Trouble-shooting
Problem
The steam is
insufficient
button to
There is a noise or
a sense of vibration
during operation
button.
The powerful 4x indicator
does not light up.
There is no continuous
ejection of 4x powerful steam.
The problem persists even
after you have followed
the above solutions.
Causes
Pour the remaining water in the water tank
out. And use the cup to add distilled water
Other types of water except distilled water or
pure water are added in the tank. or pure water to the tank " MAX(台灣:滿水)"
mark.
Have your product repaired by the specified
The steam vents are blocked up with dirt
service agent.
or scale.
If the temperature controller in the main body is activated, the steam volume may decrease for a
while. The steam volume will get back to normal once the temperature is stable. The steam will
be invisible occasionally, depending on the ambient temperature and indoor brightness.
This is the noise of temperature controller during operation, which is normal.
This is the sound or vibration caused by water pumping in the tank. It's normal.
The steam button is not pressed and held for Press and hold the steam button for about
10 seconds. 10 seconds.
The temperature is set to "MED" or "LOW". Please set the temperature to "HIGH".
When the water tank is empty and the internal Use the cup to add water to the
temperature of the body is still rising, the " MAX(台灣:滿水) " position on the tank
protection device of the product will be activated . window.
The 4x powerful steam is an instant ejection of strong steam instead of continuous steam.
Send your product to an authorized service centre for repair.
Solution
17