LG WK1310BST Owner's Manual page 64

TROUBLESHOOTING
64
Symptoms
<->
C=] ENd
Operation
Symptoms
Appliance will not turn
on.
Appliance does not
heat.
Water leaks.
Appliance runs and
pauses by itself after
the drying cycle
finishes.
Indicates that the dryer is paused or the dryer's drum rotates
periodically.
• Turn off the appliance and unload the all of the laundries from the
appliance.
Power cord is not properly plugged in.
• Make sure that the power plug is securely plugged into a grounded outlet
matching the appliance's rating plate.
House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the
problem is a circuit overload, have it corrected by a qualified electrician.
House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the
problem is a circuit overload, have it corrected by a qualified electrician.
Selected cycle does not use heat.
• Some cycles default to unheated or air drying. Select a cycle that allows
heated drying.
The optional drain hose is not connected correctly.
• Connect the optional drain hose correctly.
The door is closed while clothes or foreign substance is caught in the
door.
• Check if clothes or foreign substance is caught in the door before using the
appliance. If water leaks continuously, contact the LG Electronics
Customer Information Centre.
This is how the anti crease option works.
• Make sure that the anti crease option has been set. The option is designed
to prevent creases that are formed when the clothes are not unloaded
promptly after the drying cycle. When the option is set, the appliance runs
for 10 seconds and pauses for 5 minutes. The option is works for up to 2
hours.
Possible Cause & Solution
Possible Cause & Solution