Table of Contents
Advertisement
PRODUCT ASSEMBLY
Before first use
Before using your Fruit/Vegetable Stainer Attachment for the first time, wash all parts and
accessories either by hand or in the dishwasher (see the "Care and Cleaning" section).
ASSEMBLING THE ATTACHMENT
1.
Secure the smaller spring end of the Shaft Assembly into the Long Grind Screw.
Insert the Long Grind Screw into the Main Housing.
2.
Place the Strainer Cone over the Long Grind Screw matching the notch of the Strainer
Cone with the tab on the bottom of the Main Housing.
3.
Insert the Collar over the Strainer Cone and rotate clockwise until secured.
Slide the Strainer Shield over the cone and latch on the top of Collar.
4.
Place Splash Lid on the Strainer Shield.
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
For Stand Mixers with a hinged power hub cover: Flip up to open.
For Stand Mixers with a removable power hub cover: Turn the attachment knob
counterclockwise to remove power hub cover.
3.
Remove the Stand Mixer attachment hub cover.
4.
Insert the attachment shaft housing into the attachment hub.
5.
Tighten the Stand Mixer attachment hub knob clockwise until the attachment is completely
secured to the Stand Mixer.
6.
Place the Stand Mixer Bowl under the Strainer Shield to catch strained food and place a
smaller Bowl under the open end to catch food waste.
A
A. Notch
B. Tab
B
5
Advertisement
Table of Contents
