Turn The Surround Sound On/Off; Select Equalizer (Eq) Effect; Adjust The Bass/Treble; Adjust The Brightness - Hisense HS2100 User Manual

• When adjusting the volume, the indicator
will increase / decrease the amount of
light. According to the corresponding light
display / blinking (Fig), determine the current
volume level.
min
EN
max

7.5 Turn the Surround Sound ON/OFF

Press the SURR button on the remote control
•
to turn on the surround sound. Press this
button again to turn off the surround sound.

7.6 Select Equalizer (EQ) Effect

While playing, press the EQ button on the
•
remote control to select desired preset
equalizers: music, movie, news, game,
sport, night.
• LEDs blink for 3 sec to show current EQ mode
according to the EQ mode definition (Fig).
Music
Movie
News
Game
Sport
Night

7.7 Adjust the Bass/Treble

Press the BASS + / － buttons on the remote
•
control to adjust bass level (bass +5 / bass -5).
Press the TREBLE + / － buttons on the
•
remote control to adjust treble level (treble
+5 / treble -5).
min ( -5)
BASS
TREBLE
max ( +5)
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ●

7.8 Adjust the Brightness

Press the DIMMER + / － button on the
-
remote control to select brightness level.

7.9 Factory reset

－
Reset device to default setting.
• Turn on the soundbar, press and hold the
+ and － buttons at the same time on the
soundbar, all LEDs light up for 5 seconds,
standby LED in Red.
+
MODE
SOURCE
Volume
Surround
Dimmer
Bass
Treble
EQ
AutoWake
AutoStandby
8. AUX/ OPTICAL/HDMI ARC
Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the
or on the remote control to select AUX,
OPTICAL, HDMI ARC mode.
3 Operate your audio device directly for
playback features.
Press the VOL + / － button to adjust the
4
volume to your desired level.
Tip: The Soundbar may not be able to decode all
digital audio formats from the input source. In this
case, the Soundbar will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to
－
PCM or Dolby Digital (Refer to the user manual
of the input source device for its audio setting
details) with HDMI ARC / OPTICAL input.
+
12
DEFAULT
OPTICAL
30
ON
MAX
0
0
Music
OFF
ON
button repeatedly on the unit