Basic Operation; Standby/On; Auto-Standby / Auto-Wake; Select Modes - Hisense HS2100 User Manual

TV menu example (different models may have
different menus) :
Setting--sound--Soundbar Setting.
Note:
• This function is available only when both
Soundbar and TV support Hisense Ezplay.
• This function requires Soundbar and TV
connected via HDMI ARC, and the CEC of the
TV must be trned ON.
• If everting setting right, for the first time
connect, there would be a tip on the TV
screen to guide you find the Soundbar
setting menu.

7. Basic Operation

7.1 Standby/ON

When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.

7.2 Auto-Standby / Auto-Wake

• [Auto-Standby] The soundbar automatically
turns to Standby mode after about 15
minutes if the TV or the external soundbar
is disconnected (or USB, BT function bit
playback pause), or switched off.
• [Auto-Wake] If a TV or an external device
is connected (OPTICAL socket), the unit will
switch on automatically when the TV or the
external device is switched on.
Auto-standby ON/OFF
Turn on the soundbar, press and hold the[
[ + ] button at the same time on the soundbar to
activate and deactivate the auto-standby:
Lamp Mode
Auto Standby On :
Your Soundbar has been programmed to
● ● ● ● ● ● ● ●
enter Standby mode automatically when
no audio is detected for 15 minutes.
Auto Standby Off:
You can turn off the Auto Standby to keep
● ● ● ● ● ●
your Soundbar always working.
Activate and Deactivate the Auto-Wake:
In optical mode, press the VOL + , VOL + ,
buttons on the remote control to activate and
deactivate the auto-wake:
Lamp Mode
Auto-Wake On
The Soundbar will wake up automatically
● ● ● ● ● ● ● ●
when audio input is detected.
Auto-Wake off
● ● ● ● ● ●
The Soundbar does not wake up automatically.

7.3 Select Modes

• Press the (SOURCE) button repeatedly
on the unit or on the remote control to select
the desired mode.
• The indicator light on the front of the main
unit will show which mode is currently in use.
Lamp
Red
● ●
Green
● ●
Blue
● ●
Orange
● ●
White
● ●
Yellow
● ●

7.4 Adjust the Volume

Press the VOL + / VOL- buttons on the unit or
•
on the remote control to adjust the volume.
• If you wish to turn the sound off, press the
(MUTE) button on the remote control. Press
(MUTE) button again or press the VOL
the
+ / － buttons to resume normal listening.
11
Mode
Standby
AUX
BT (Bluetooth)
OPTICAL
HDMI ARC
USB
]
EN
,