Select Modes; Adjust The Bass/Treble Level; Turn The Surround Sound On/Off; Adjust The Volume - Hisense U3120G User Manual

Select Modes

Press the (SOURCE) button repeatedly on the
unit or the SOURCE button on the remote control
to select the OPT,COAX, ARC,HDMI,BT_IN
(Bluetooth) and USB mode. The selected
mode will show on the display.

Adjust the Bass/Treble Level

• Press TREBLE then press VOL+/- button to
increase or decrease the treble.
(treble+5 / treble–5)
• Press BASS then press VOL+/- button to
increase or decrease the bass.
(bass+5 / bass–5)
• After about 5 seconds, the unit will exit from
bass/treble setting. The display will show the
current selected mode. You may now press the
VOL+ / - buttons to adjust volume.

Turn the Surround Sound ON/OFF

• Press the SURR button on the remote control
to turn o the surround sound. Press this

Adjust the Volume

• Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
•
If you wish to mute the sound o ,press the
(MUTE) button on the remote control. Press
the (MUTE) button again or press the VOL+
/ VOL- buttons to resume normal listening.

Adjust the Brightness

• • Press the DIMMER +/- button on the remote
control to select brightness level.
• Display will close after no user action or audio
format change for 15 seconds
• While playing, press the EQ button on the
remote control to select desired preset
equalizers:
MUSIC, MOVIE, NEWS, SPORT, NIGHT,
GAME, AI EQ.
on
OPTICAL / COAXIAL /HDMI
ARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the button repeatedly on the unit or
the SOURCE button on the remote control to
select the OPT,COAX,ARC, HDMI,BT_IN,USB
mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player, etc.)
is set to PCM, Dolby Digital or DTS (Refer to the
user manual of the input source device for its
audio setting details) with HDMI IN / HDMI ARC
(eARC) / OPTICAl / COAXIAL input.
•
unit will display the following as follows:
Audio (abbreviation)
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos -
Dolby TrueHD
Dolby Atmos -
Dolby Digital Plus
DTS Ditital Surround
DTS:X
Bluetooth Operation

Pair Bluetooth-enabled Devices

to this unit, you need to pair your device to this
unit.
14
Display
PCM AUDIO
MPCM AUDIO
MPCM AUDIO
DOLBY SURROUND
/ DOLBY AUDIO
DOLBY SURROUND
/ DOLBY ATMOS
DOLBY SURROUND
/ DOLBY ATMOS
DTS
DTS-X