Hisense U3120G Quick Start Manual

Quick Start Guide
3.1.2CH Soundbar with wireless subwoofer
Model: U3120G
What's in the Box
Main Unit
Optical Cable
*AC Power Cord x2
* Power cord quantity and plug type vary by regions
1
Remote control
1 Switch the unit between ON and
STANDBY mode.
2 (SOURCE) Select the play mode.
3 SURR
Adjust the surround ON/OFF.
4
(BT) Select the Bluetooth mode.
5 EQ Select MUSIC/MOVIE/NEWS/SPORT/
NIGHT/GAME/ AI EQ
6 / Skip to previous/next track in
BT/USB mode.
7 VOL+/VOL- Increase/decrease the volume level.
8
Play/pause/resume playback in
BT/USB mode.
9 BASS+/-
Increase/decrease the bass level.
10 TREBLE+/-
Increase/decrease the treble level.
11 DIMMER+/-
Adjust display brightness.
12
(MUTE) Mute or resume the volume.
Pass through
Remote Control /
Wireless Subwoofer HDMI Cable
AAA Battery x 2
Screw x 2
Expansion screw x 2 User Manual/Quick Start Guide
Replace the Remote Control Battery
1 Press and slide the back cover to
open the battery compartment of
the remote control.
2 Insert two AAA size batteries
Make sure the (+) and (–) ends of
the batteries match the (+) and
and (–) ends indicated in the battery
compartment.
3 Close the battery compartment cover.
- Do not mix old and new batteries;
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
E N 2
Identifying the Parts
Main Unit
1 Display Window
Show the current status.
2 Remote Control Sensor
Receive signal from the remote control.
3 Standby indicator
4 (ON/OFF) button
Switch the unit between ON and Standby
mode.
5 (SOURCE) button
Select the play function.
6 VOL+/VOL- buttons
Increase/decrease the volume level.
7 Wall Mount
Install the wall mounting screws into the
wall mount of the unit.
8 COAXIAL Socket
9 OPTICAL Socket
10 HDMI OUT
(eARC/ARC)
Connect to a TV via HDMI cable.
11 HDMI IN Sockets
12 TYPE-C Sockets (Only for rear surround
Speakers)
13 USB Socket
Insert the USB device to play music.
14 AC IN Socket
Connect to the power supply.
Wireless Subwoofer
1 PAIR Indicator
Light stops blinking once the Subwoofer is
paired with the Soundbar.
2 PAIR button
Press activate the pairing function between
the main unit and the subwoofer.
3 AC IN Socket
Connect to power.
Socket