Attach Dp-2 Chains To Enclosures - HP 3PAR StoreServ 7000 Configuration Manual
Hide thumbs
Also See for 3PAR StoreServ 7000:
- Service manual (78 pages) ,
- Troubleshooting manual (75 pages) ,
- Planning manual (62 pages)
Table of Contents
Advertisement
Attach DP-2 Chains to Enclosures
Red routing
1.
Connect Node 0 (DP-2) to the I/O 0 (DP-1) on the B drive enclosure closest to the controller.
2.
Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller.
Green routing
1.
Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller.
2.
Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller.
NOTE:
The two adjacent enclosures are not directly connected.
2 Node 3 Drive Enclosures (3L)
17
Advertisement
Table of Contents
