Table of Contents
Advertisement
Open the appliance door fully.
1.
Open the locking levers on the left- and right-hand
2.
hinges
a The locking levers are open. The hinges are now se-
cured and cannot snap shut.
Close the appliance door fully.
3.
Press on the left- and right-hand pressure surface
4.
until it audibly clicks.
Push the two sliding caps upwards in the direction
5.
of the arrow
.
Remove the inner panel upwards at an angle and
6.
set it down carefully on a flat surface.
Open the left- and right-hand metal strip in the direc-
7.
tion of the arrow
.
Pull the first and second intermediate panels up-
8.
wards and out at an angle, and set them down care-
fully on a flat surface.
9.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
▶
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panels on both sides with
glass cleaner and a soft cloth.
Clean the appliance door.
10.
→ "Suitable cleaning agents", Page 18
Note: While the cleaning function is running, the
11.
frame on the inside of the appliance door or other
parts of the door that are made of stainless steel
become discoloured. This discolouration does not
compromise the functionality of the appliance. The
discolouration can be removed using a stainless
steel cleaner.
Dry the door panels and refit them.
→ "Fitting the door panes", Page 23
20.4 Fitting the door panes
Note:
Ensure that the arrow is on the top left on the interme-
diate panes.
Appliance door en
23
Advertisement
Table of Contents
