Using Mdc; Mdc Programme Installation/Uninstallation - Samsung QB43C User Manual

Using MDC

Multiple display control "MDC" is an application that allows you to easily control multiple
display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the programme.
The MDC programme is available on the website. (https://displaysolutions.samsung.com/
support/resources/product-support)
" If you press the On or Off button located at the top left of the screen, the product checks its
status for about one minute. To run other commands, try after the one minute.
" For details on how to connect devices for multiple display control, refer to page 31.

MDC Programme Installation/Uninstallation

" Installing and uninstalling steps can vary depending on the OS.
Installation
" MDC installation can be affected by the graphics card, mother board and network
conditions.
1
Click the MDC Unified installation programme.
2
Click "Next".
3
When the "Welcome to the InstallShield Wizard for
"Next".
4
In the "License Agreement" window displayed, select
agreement" and click "Next".
5
In the displayed "Customer Information" window, fill out all the information fields and click
"Next".
6
In the displayed "Destination Folder" window, select the directory path you want to install
the programme in and click "Next".
" If the directory path is not specified, the programme will be installed in the default
directory path.
MDC_Unified" screen appears, click
"I accept the terms in the license
7
In the displayed "Ready to Install the
the programme in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard
" Select "Launch the program" and click "Finish" to run the MDC programme immediately.
10
The MDC Unified shortcut icon will be created on the desktop after installation.
" The MDC execution icon may not be displayed depending on the PC system or product
specifications.
" Press F5 if the execution icon is not displayed.
Uninstallation
1
Select Settings → Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
Program" window, check the directory path to install
Complete" window.
39