Table of Contents
Advertisement
9. Flash – Setting Flash
[MANUAL]
Sets the flash output manually.
•
With [TTL], you can record the images you want even when recording dark
scenes where the flash output tends to become greater.
•
The flash output ([1/1], etc.) is displayed on the flash icon of the recording
screen.
2
(When set to [MANUAL]) Select [Manual Flash Adjust.]
and then press
3
Press 21 to set the flash output and then press
.
•
It can be set within the range of [1/1] (full flash output) to [1/128] in 1/3 steps.
or
.
312
or
Advertisement
Table of Contents
