Racking Solutions HST001 Assembly Instructions

Chrome 3 tier mini rack
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly &
keep away from small children.
Each shelf holds up to 100kg with equal weight distribution on
Total weight capacity of shelving rack is 300 kg on feet levelers.
HELP LINE
01977 555007
PACKAGE CONTENTS
AX3
Shelf
CX24+2
extra Slip sleeve
ASSEMBLY INSTRUCTIONS
HST001
BX4
Pole ( with end cap, threaded insert
and feet leveler pre
DX4
Feet Leveler
leveling feet.
-
installed)
Information
if in doubt contact the supplier
Please read these instructions
throughly before commencing
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
!
Caution
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
!
Warning
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.
TOOLS REQUIRED
Rubber Mallet