Download Print this page

Racking Solutions WR002 Assembly Instructions

Chrome household 4 tier wine rack

Advertisement

Quick Links

Chrome Household 4 tier wine rack
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly
& keep away from small children.
Each shelf holds up to 150kg with equal weight distribution on leveling feet.
Total weight capacity of shelving rack is 600 kg on feet levelers.
HELP LINE
01977 555007
PACKAGE CONTENTS
AX32+2
extra Slip sleeve
CX4
Shelf
ASSEMBLY INSTRUCTIONS
WR002
BX4
Feet Leveler
DX4
Pole ( with end cap, threaded insert
and feet leveler pre
!
!
-
installed)
Information
if in doubt contact the supplier
Please read these instructions
throughly before commencing
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
Caution
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
Warning
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.
TOOLS REQUIRED
Rubber Mallet

Advertisement

loading

Summary of Contents for Racking Solutions WR002

  • Page 1 Please read these instructions Chrome Household 4 tier wine rack throughly before commencing assembly. WR002 Inspect all packages for damage and check that all components have been supplied Assembly should be undertaken by at least two people...
  • Page 2 ASSEMBLY INSTRUCTIONS STEP 1: SLIP SLEEVES STEP 3: INSTALLING REMAINNING SHELVES On the Pole (D), place 1 pair of slip sleeves (A) at the desired level. Repeat Step 2 to install remaining Shelves (C) as desired. Please make sure the arrow faces up and that the word “top” is right side up.