Download Print this page

Racking Solutions CRCU002 Assembly Instructions

Mini 5 tier chrome shelving

Advertisement

Quick Links

Mini 5 Tier Chrome Shelving
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly
& keep away from small children.
Each shelf holds up to 115kg with equal weight distribution on leveling feet.
Total weight capacity of shelving rack is 575 kg on feet levelers.
HELP LINE
01977 555007
PACKAGE CONTENTS
AX5
Shelf
extra Slip sleeve
DX4
Middle Pole (with
pole connector
pre-installed)
ASSEMBLY INSTRUCTIONS
CRCU002
BX40+2
Top Pole (with end cap and
pole connector pre-installed)
EX4
Bottom Pole (with
threaded insert
and feet leveler
pre-installed)
!
!
CX4
FX4
Feet Leveler
Information
if in doubt contact the supplier
Please read these instructions
throughly before commencing
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
Caution
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
Warning
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.
TOOLS REQUIRED
Rubber Mallet

Advertisement

loading

Summary of Contents for Racking Solutions CRCU002

  • Page 1 Please read these instructions Mini 5 Tier Chrome Shelving throughly before commencing assembly. CRCU002 Inspect all packages for damage and check that all components have been supplied Assembly should be undertaken by at least two people...
  • Page 2 ASSEMBLY INSTRUCTIONS STEP 4: INSTALLING REMAINNING SHELVES STEP 1: SLIP SLEEVES On Pole (C+D+E), place 1 pair of slip sleeves (B) at the desired distance On the Bottom Pole (E), place 1 pair of slip sleeves (B) at the desired level. between Shelves (A).