Racking Solutions CR002 Assembly Instructions

Heavy duty 5 Tier Chrome Shelving
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly
& keep away from small children.
HELP LINE
Each shelf holds up to 240kg with equal weight distribution on leveling feet.
Total weight capacity of shelving rack is 1200 kg on feet levelers. 01977 555007
PACKAGE CONTENTS
AX5
Shelf extra Slip sleeve
DX4
Bottom Pole (with threaded insert
and feet leveler pre-installed)
ASSEMBLY INSTRUCTIONS
CR002
BX40+2
Top Pole (with end cap and
pole connector pre-installed)
EX4
Feet Leveler
!
!
CX4
if in doubt contact the supplier
Please read these instructions
throughly before commencing
assembly.
Information
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
recommended
Caution
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
Warning
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.
TOOLS REQUIRED
Rubber Mallet