Using a computer to change settings
1.
Install F2 Editor on the computer.
This can be downloaded from the ZOOM website (zoomcorp.com).
2.
Turn the F2/F2-BT power on.
3.
Use a USB cable to connect the F2/F2-BT and the computer.
4.
Launch F2 Editor, and change the F2/F2-BT settings.
NOTE
Connection with a computer is not possible during recording or playback.
Connecting to a smartphone/tablet and using F2 Control
for remote control (F2-BT only)
1.
Install the F2 Control app from the App Store or Google Play on the smartphone/
tablet.
2.
Turn the F2-BT power on.
3.
Launch F2 Control on the smartphone/tablet.
When F2 Control launches, a Bluetooth device list will appear. Tap the device name/ID to connect
to the F2-BT.
The REC/PLAY LED will light orange on the F2-BT connected to F2 Control.
4.
Use F2 Control to operate and set the F2-BT.
NOTE
Connection with F2 Control is not possible when connected to a computer.
USB Type-C port
9