Sharp XL-MP8H Operation Manual page 18

System connections (continued)
XL-MP8H
ENGLISH
! AC power connection
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Wall socket
(AC 230 V, 50 Hz)
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
E-7
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
05/4/18 XL-MP8H(H)E1.fm
12
TINSZA056SJZZ