Advertisement
6 Check Sensors and Start Logging
1. Select the Sensors window and click
the Read now button. The sensor
readings will continually refresh on a
scrolling time graph.
2. Observe the sensor reading display in
the scrolling charts and value panels
while adjusting sensor wiring and/or
installation conditions.
3. Click the Cancel button when finished.
4. Once sensors are setup select the
Logger window and click Start to
commence logging.
7 Retrieve, View and
Save Logged Data
1. Select the Dataset window. All stored
data in the logger will be retrieved and
displayed on the screen (it may take a
few seconds to upload the data).
Click Refresh if required.
2. Select File, Save to save the data to a
dataset file.
3. Select File, Open to open and view a
previously saved dataset file.
4. To save a dataset file as a ASCII file
for importing into other programs,
open the file in DeltaLINK, and select File, Save As... selecting the appropriate file
type to save.
Dataset Import Wizard
Dataset Import Wizard helps you seamlessly import data into MS Excel spreadsheets.
Multiple dataset files may be imported and the data interleaved.
1. Select
, All apps, DeltaLINK, Install Dataset Import Wizard.
2. If prompted by Excel, select Enable Macros. Note that Excel's security settings must
allow macros to run: refer to Excel Help.
3. Dataset Import Wizard will report that it has installed successfully, and will add
Import Dataset(s) to the Add-in menu (or File menu in earlier Windows versions).
To Start Dataset Import Wizard: Start Excel, select Add-ins, Import Dataset(s) and
follow the instructions (or File, Import Datasets in earlier versions of Windows.
DeltaLINK Cloud
For our free Cloud service see
http://www.delta-t.co.uk/deltalink-cloud/
2016 Delta-T Devices Ltd
Page 7
Advertisement
