Advertisement
Start DeltaLINK-PC
1. Connect the DL6 to the PC's serial port
(preferably COM1) using the supplied
DL6 to PC serial cable
2. Double click on the DeltaLINK-PC icon
on the desktop.
3. DeltaLINK attempts
to connect to a
logger. If successful,
DeltaLINK shows information about the
DL6 in the Logger window.
4. If you have a fresh installation,
DeltaLINK attempts to use COM1. If
the connection fails because the DL6
is connected to the wrong serial port
select File, Properties. Click New... to
create a connection which uses the correct port.
Online Help
DeltaLINK provides extensive online Help. Click Help from any DeltaLINK window (or
press F1) for detailed information about DeltaLINK operation and functionality.
Select Help, Document Library to open a folder of application notes and technical
documentation.
5 Program the DL6
1. Select the Program window. For a new
logger, this will show the DL6's factory-
set 'Default' program. Click Change to
enter your own program settings.
2. Right-click the Input Channels list to
select a sensor type from a pop-up
menu, or select Edit Channel from the
popup menu to customize a sensor's
properties.
3. Click the Advanced Features options
to add or remove Alarm, Control and
Dual Rate tabs, and enter details in
these tabs, as required.
4. Click Apply to install a modified logging
program into the DL6 logger.
Custom Sensor Support
DeltaLINK supports the use of custom sensor linearisation tables for using custom
sensor types. Refer to the Document Library folder for detailed instructions.
1
You can also communicate with the DL6 via a modem (see Document Library folder for modem
application notes).
2016 Delta-T Devices Ltd
1
Page 6
Advertisement
