Gigabyte TRX50 AERO D User Manual page 24

10/11) A_SATA3 0/1/2/3, SATA3 0/1/2/3 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s
and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA
connectors support RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set,"
for instructions on configuring a RAID array.
12) M2C_CPU/M2B_CPU/M2A_CPU/M2D_CPU (M.2 Socket 3 Connectors)
There are two types of M.2 SSDs: M.2 SATA SSDs and M.2 PCIe SSDs. This motherboard only supports
M.2 PCIe SSDs. Please note that an M.2 PCIe SSD cannot be used to create a RAID set with a SATA
hard drive. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's website for instructions
on configuring a RAID array.
& Please visit GIGABYTE's website for details on using M.2 EZ-Latch Click/M.2 EZ-Latch Plus.
M.2 SSD installation with M.2 EZ-Latch Click:
M.2 SSD installation with M.2 EZ-Latch Plus:
M.2 SSD removal with M.2 EZ-Latch Plus:
* Motherboard heatsink design may vary by model.
2 0
A_SATA3
3 1
7
7
2 0
SATA3
3 1
7
7
https://www.gigabyte.com/WebPage/1048/M.2-EZ-Latch-Click.html
https://www.gigabyte.com/WebPage/920/M2-latchplus.html
https://www.gigabyte.com/WebPage/921/removeM2.html
- 24 -
Pin No. Definition
1
1
2
1
3
4
5
6
1
7
1
M.2 EZ-Latch Plus
80
80
80
GND
TXP
TXN
GND
RXN
RXP
GND
M.2 EZ-Latch Click
110
110
110
80
M.2 EZ-Latch Click