Onboard Buttons And Leds - Gigabyte TRX50 AERO D User Manual

2-7

Onboard Buttons and LEDs

Quick Buttons
This motherboard has 2 quick buttons: power button and reset button. The power button and reset button allow
users to quickly turn on/off or reset the computer in an open-case environment when they want to change
hardware components or conduct hardware testing.
The reset button provides you with several functions to use. To remap the button to perform different
tasks, please navigate to the "BIOS Setup" page of GIGABYTE's website and search for "RST_SW
(MULTIKEY)" for more information.
CLR_SW (Clear CMOS Button)
Use this button to clear the BIOS configuration and reset the CMOS values to factory defaults when needed.
• Always turn off your computer and unplug the power cord from the power outlet before using
the clear CMOS button.
• Do not use the clear CMOS button when the system is on, or the system may shutdown and
data loss or damage may occur.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (please navigate to the "BIOS Setup" page of GIGABYTE's
website for more information).
PW_SW
RST_SW
CLR_SW
- 17 -
PW_SW: Power Button
RST_SW: Reset Button