UCL SWIFT TEK-2 Training Manual page 19

NORTH AMERICA
TECHNICAL GUIDE
INTRODUCTION
The LSSM dual laser source provides stabilized optical power levels for accurate loss measurements on
singlemode fiber systems. Technicians can utilize each of the wavelengths included in this light source to
reference and test with UCL Swift's optical power meters and gather measurements to meet international
standards.
The LSSM provides a 2kHz tone output which is recognized by optical power meters; the incoming 2kHz
signal is identified and an audible alert is provided by the power meter. This 2kHz signal will also allow fiber
identification when used with non-invasive fiber identifier devices, such as our FI2K.
Easy removal of the included SC adapter allows the light source ferrule to be cleaned, preventing
contamination of test jumpers. Additional adapters are available.
This device maintains full compliance with all FDA and CFR standards for light-emitting products.
FEATURES
Small form-factor for fast, simple testing in the field
Single output port ensures faster switching when
testing at multiple wavelengths
Combine LSSM with an optical
power meter (OPM1 pictured)
to perform insertion loss tests
on singlemode fiber.
LSSM
NIST-traceable laser output
Long-lasting battery
The 2kHz tone output of the
LSSM can be recognized
through the fiber jacket when
a Fiber Identifier is used.
Laser Light Source - SM
Quick-change adapters allow
users to adjust the LSSM output
to match their testing situation.