Mitsubishi Electric NTXMMX A AA Series Service Manual page 20

8-11. SLEEP ( ) OPERATION
1. How to set SLEEP operation
(1) Press STOP/OPERATE (OFF/ON) button.
(2) Select COOL, DRY, HEAT or FAN mode.
(3) Press SLEEP (
(4) PRESS TEMPERATURE buttons [
operation.
Fan speed:
Horizontal vane:
Operation indicator lamp: Dimly lit
• Once the above procedure is completed, the settings will be saved.
• After the settings are saved, a single push of SLEEP (
same settings every time.
• Temperature for SLEEP operation cannot be set during DRY or FAN mode.
Set temperature for SLEEP operation.
For about 30 minutes after SLEEP (
when the SLEEP button is pressed. It will change to the set temperature for SLEEP operation in about 30 minutes.
Pressing SLEEP (
NOTE:
• ON/OFF timer is available during SLEEP operation.
• When a preset ON time for the weekly timer arrives during SLEEP operation, the weekly timer operation has priority. SLEEP
operation will be cancelled, and the operation set on the weekly timer will start.
2. How to cancel operation
• Press SLEEP (
• The operation returns to the previous settings.
• SLEEP operation is also cancelled when the FAN button is pressed or the operation mode is changed.
NOTE: SLEEP operation and SMART SET operation cannot be set at same time.
OBHT802B
) button.
(Increase) and
AUTO
Position set on the remote controller
) button is pressed, the set temperature remains as set for the operation running
) button again returns the operation to the previous settings.
is
pressed.
Set
temperature for
the operation
before SLEEP
operation
For about 30
minutes
) button again.
(Decrease) ] to set the temperature of SLEEP
) button during operation activates SLEEP operation with the
is
pressed.
Set temperature for
Set temperature for
the operation before
SLEEP operation
SLEEP operation
20