Mitsubishi Electric NTXMMX A AA Series Service Manual page 19

(4) Press button to complete and transmit the weekly timer setting.
NOTE:
• Press button to transmit the setting information of weekly timer to the indoor unit. Point the remote controller toward the
indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
setting. Press button once after all the settings are complete. All the weekly timer settings will be saved.
• Press button to enter the weekly timer setting mode, and press and hold
timer settings. Point the remote controller toward the indoor unit.
(5) Press button to turn the weekly timer ON. (
•When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press button again to turn the weekly timer OFF. (
NOTE:
The saved settings will not be cleared when the weekly timer is turned OFF.
2. Checking weekly timer setting 2. Checking weekly timer setting
(1) Press button to enter the weekly timer setting mode.
* blinks.
(2) Press or buttons to view the setting of the particular day or number.
(3) Press button to exit the weekly timer setting.
8-10. SMART SET ( ) OPERATION
1. How to set SMART SET operation
(1) Press STOP/OPERATE(OFF/ON) button.
(2) Select COOL or HEAT mode.
(3) Press SMART SET button.
(4) Set the temperature, fan speed, and airflow direction for SMART SET operation.
NOTE:
• SMART SET operation cannot be selected during DRY, FAN or AUTO mode operation.
• The setting range of HEAT mode SMART SET operation is 50°F (10°C) and 61 - 88°F (16 - 31°C).
• 2 groups of setting can be saved. (One for COOL, one for HEAT)
• SMART SET operation and the weekly timer operation cannot be used together.
• SMART SET operation and SLEEP operation cannot be set at the same time
2. How to cancel operation
• Press SMART SET button again.
• SMART SET operation can also be cancelled by pressing OPERATION SELECT button to change the operation mode.
The preferred setting can be saved for the next time with a single press of SMART SET button.
OBHT802B
* which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
goes out.)
19
button does not have to be pressed per each
button for 5 seconds to erase all weekly