SKMEI 1743 Operation Manual

LIGHT（A Key）
L
MODE（B Key）
A Key ：EL Back Light, Bluetooth Switch.
B Key ：Mode Conversion, Confirming and Save.
C Key ：Selection, Setting, Reset.
D Key ：Up, Begin timing, Pause, Switch, Photograph.

Function instruction:

一、Watch side
Built-in low-power BLE4.0.

Time and exercise data can be synchronized via mobile phone.

In the case of BLE connection with the mobile phone, the watch can realize instant messaging, call notification

and remote photography.
12-digit timing function, display hour, minute, second, day, month, week.

Smart alarm clock (implemented with APP).

Step counting function, the watch intelligently calculates the number of steps, calories, and walking distance, the

watch will automatically record the data of the day.
Stopwatch/Chronograph: Maximum stopwatch timing 23 hours, 59 minutes and 59 seconds.

12/24 hour Format setting selection, automatic calendar.

EL backlight.

二、APP side
APP will organize and save the exercise data obtained through the watch, and automatically generate daily

exercise, weekly exercise, and monthly exercise reports.
The exercise plan can be set through the APP, and the APP will conduct exercise analysis according to the

personally defined plan.
App has built-in cycling and running modes respectively. Through the use of watch and mobile phone, exercise

data and trajectory can be obtained separately. These data and movement trajectories can be shared to the circle
of friends.
APP can select and set the reminder function of the watch (such as PHONE CALL, WECHAT can be turned on or

off).
Turn on: Press the four buttons of the watch at the same time until the display turns on, indicating that the watch is
turned on.
Power off: Press the four buttons of the watch at the same time until the display turns off, indicating that the watch has
been turned off.
In any mode,press and hold A key for about 3 seconds to turn on or off the Bluetooth of the watch.

When the watch has not been successfully connected with the mobile phone, the Bluetooth icon on the display

is flashing.
When the connection between the watch and the mobile phone is successfully completed, the Bluetooth icon

on the display is in a flashing state;
SKMEI 1743 Operation Manual

ON/OFF MODE

Bluetooth ON/OFF Mode

（D Key）START
（C Key）RESET