Advertisement

SKMEI (Model 1077) DIGITAL WATCH INSTRUCTIONS
LIGHT
START
RESET
MODE
Four buttons on this watch are known as: LIGHT, MODE, RESET, and START

TO SELECT THE DISPLAY MODE

Push the Mode Button to select one of the following four display modes in the following order:
Normal Time -> Stop Watch -> Alarm Set -> Time Set
In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none
flash). If the alarm bell icon at the bottom left is displayed, the alarm is turned on.

TO STOP/START THE ALARM

Press the MODE button x 2 to view the current alarm set time.
Press the START button to toggle between alarm on and hourly chime on, and off.
The small bell icon indicates the alarm is on.
The small triangle indicates the hourly chime is on.
TO SET THE TIME & DATE
Press the MODE button x 3 until the seconds are flashing.
To set the Hour press the RESET button x 1. Press the START button to increase the hours.
When an H is shown the watch is set in 24 hour time mode.
Press the RESET button again to toggle through Minutes -> Month -> Date -> Day of Week ->
Seconds
Press the START button to change the setting you are on.
Press the MODE button to complete.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1077 and is the answer not in the manual?

Questions and answers

Summary of Contents for SKMEI 1077

  • Page 1 SKMEI (Model 1077) DIGITAL WATCH INSTRUCTIONS LIGHT START RESET MODE Four buttons on this watch are known as: LIGHT, MODE, RESET, and START TO SELECT THE DISPLAY MODE Push the Mode Button to select one of the following four display modes in the following order: Normal Time ->...
  • Page 2 TO SET THE ALARM Note: The alarm is turned on every time the Alarm is set. Press the MODE button x 2 Press the RESET button to select hours which will start flashing. Press the START button to increase the hours Press the RESET button to select minutes.

Table of Contents

Save PDF