SKMEI 1464 User Manual

Table of Contents

Download this manual

User Manual of SKMEI Mode #1464

A:Features

OLED display hour,minute, second,week, date, month, day,temperature function



12/24 H Format selectable



Pedometer



7-day step data query function



Compass



Alarm and Chime hourly



Stopwatch(maximum 23:59"59)



Count Down



Dual time



the LED will light on 10 seconds when press any key.



B:Synchronous needle function

In the Time mode, press E key to set the needle function, press and hold down E key to move the minute hand quickly.

C:Product mode loop

D:Product function mode

E:Product function settings

Table of Contents

Need help?

Do you have a question about the 1464 and is the answer not in the manual?

Page 1 User Manual of SKMEI Mode #1464 A:Features OLED display hour,minute, second,week, date, month, day,temperature function  12/24 H Format selectable  Pedometer  7-day step data query function  Compass  Alarm and Chime hourly  Stopwatch(maximum 23:59"59)  Count Down ...
Page 2 1. Time and date setting function In the Time mode, press A key for 3 seconds to enter the time setting state. At this time, “12H” flashes, press B key  “second”starts to flash,then press B key to select setting item (flashing) as following sequence: Press C key to increase the selected value, and press D key to decrease the selected value.
Page 3 Press C key to increase the selected value, and press D key to decrease the selected value.  Press A key to confirm and return to the Countdown mode.  4.Alarm function In the Alarm mode, press C key to switch the mode as follows: ...
Page 4 6.Pedometer function In Pedometer mode, press C key to“turn on/pause”the function.  In Pedometer mode,press A key to switch the mode as following.  In Pedometer mode,hold down A key for 3 seconds to start setting.  Metric/Inch: The default is metric system, press C key to switch to metric or imperial. ...
Page 5 In Compass calibration mode 1,press C key when the arrow points to the 6 position , when OK appears then into  Calibration mode 2. In Compass calibration mode 2, hold the watch upside down ,press C key when the arrow points to the 12 ...