Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell P156G Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the wireless card.
5. Remove the left fan.
6. Remove the right fan.
7. Remove the speakers.
8. Remove the coin-cell
9. Remove the touchpad.
10. Remove the display assembly.
11. Remove the I/O board.
12. Remove the power button with fingerprint
13. Remove the M.2 2230 solid-state drive
14. Remove the system board.
NOTE: The system board can be removed with the heat sink and solid-state drives attached.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.
56 Removing and installing components
Before working inside your
battery.
reader.
or M.2 2280 solid-state
computer.
drive, as applicable.
Before working inside your