Steps
1. Align and place the right fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the right fan with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the right fan to the palm-rest and keyboard assembly.
4. Connect the right-fan cable (FAN1) to the system board.
5. Adhere the tape that secures the right-fan cable (FAN1) to the system board.
6. Adhere the Mylar that covers the right-fan cable (FAN1).
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
30
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Before working inside your