Headphones Connection - NEC MultiSync E658 Setup Manual

2. Connect external equipment
• To protect the external equipment, disconnect the power cord of this product before
making connections.
Computer (RS-232C)
Power supply port 5V/3A
(maximum)
Dotted lines = other signal
Solid lines = video signal
Dashed lines = audio signal

Headphones connection

When using headphones, connect them to the HEADPHONE connector of the product.
CAUTION: Do not connect the headphones while wearing them.
Otherwise, your ears may be injured depending on the sound volume.
NOTE: • Headphones with a stereo mini-
jack plug can be connected to
the product. If the plug of your
headphones is too large to enter the
connector, buy a 6.35 mm stereo
jack plug to stereo mini-jack plug
adapter in your audio store.
• The sound from the speaker is
muted when headphones are
connected.
• Adjustment of the volume control as
well as the equalizer to other settings than the center position may increase
the ear-/headphones output voltage and therefore the sound pressure level.
AV Amplifier
Headphone
External speaker
VCR
NOTE: When connecting the product to the
video output connector (component)
of a video player or another device,
go to [Setup] in the OSD menu →
[VGA Options] → [VGA Mode], and
select [YPbPr].
HEADPHONE connector
English-10
USB storage for
Media Player
Computer (stereo mini-jack)
Computer (D-Sub)
Video player
(stereo mini-jack)
Video player (component)
Computer (HDMI)
Video Player (HDMI)
Blu-ray or
DVD Player (HDMI)