specification, such as 10Mbps 10Base-T or 100Mbps 100Base-
TX. Then recheck the LED.
Product's LED
LED F indicates the 100Mbps Link, meaning whether the product
connect to the network at 100Mbps speed. LED L indicates the
100Mbps Link, meaning whether the product connects to the
network at 100Mbps speed. If both of these two LEDs are light,
the STP/UTP port doesn't link to the network. If only LED F is
light, it means data transmission at 100Mbps or normal network
link. If only LED L is light, it means data transmission at 10Mbps
or normal network link.
Appendix B Technical Specification
Topology
Star
Connector Supported
RJ45
Standard
IEEE802.3 10Base-T, IEEE802.3u
100Base-TX, PC Card Type II
Transmission Rate
10Mbps or 20Mbps, 100Mbps or 200Mbps
Software
ODI Driver for NetWare 3.x, 4.x, Microsoft
Windows 9x, Windows NT, Windows 2000,
Windows ME, etc.
Operating Temperature
0
to 40
Store Temperature
-40
to 70
Humidity
10% to 90% (Non-condensing)
Dimension
115mm 54mm 14mm
3
User's Guide
10/100M Fast Ethernet PC Card
71030295