Panel Layout; The Front Panel - TP-Link TL-WR542G User Manual

Adopts 2x to 3x eXtended Range™ wireless LAN transmission technology.
Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps data transfer rates.
Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security.
Shares data and Internet access for users, supporting PPPoE, Dynamic IP, Static IP, L2TP,
PPTP, Big Pond Cable Internet access.
Supports Virtual Server, Special Application and DMZ host.
Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
Detachable reverse SMA connector Antenna.
Connecting Internet on demand and disconnecting from the Internet when idle for PPPoE.
Built-in NAT and DHCP server supporting static IP address distributing.
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address
filtering.
Supports connecting/disconnecting from the Internet on a specified time of day.
Supports access control, parents and network administrators can establish restricted access
policies based on time of day for children or staff.
Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access Control
List).
Supports Flow Statistics.
Supports ICMP-FLOOD, UDP-FLOOD, and TCP-SYN-FLOOD filter.
Ignores Ping packets from WAN or LAN ports.
Supports firmware upgrade.
Supports Web management.

1.3 Panel Layout

1.3.1 The Front Panel

The Router's LEDs are located on the front panel (View from left to right). Table 1-1 describes the
LEDs on the front panel of the router.
TL-WR542G 54Mbps Wireless Router User Guide
2