Remote Management - TP-Link TL-WR542G User Manual

54m wireless router
Table of Contents

Advertisement

To modify or delete an existing entry:
1.
Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2.
Modify the information.
3.
Click the Save button.
Click the Enable All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
Fox example: If you want to block the PC with MAC addresses 00-0A-EB-00-07-BE and
00-0A-EB-00-07-5F to access the Internet, first, enable the Firewall and MAC Address Filtering
on the Firewall page, then, you should specify the Default MAC Address Filtering Rule "Deny
these PC(s) with effective rules to access the Internet" on the Firewall page and the following
MAC address filtering list on this page:

4.8.5 Remote Management

You can configure the Remote Management function on this page shown in Figure 4-41. This
feature allows you to manage your Router from a remote location, via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service
port 80. This router's default remote management Web port number is
security, you can change the remote management Web interface to a custom port by
entering that number in this box provided. Choose a number between 1024 and 65534, but
do not use the number of any common service port.
TL-WR542G
Figure 4-41 Remote Management
53
54Mbps Wireless Router User Guide
80.
For greater

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents