System Requirements; Installation Environment Requirements; Connecting The Router; The Best Location For Wireless Network Connection - TP-Link TD-W8920G User Manual

108m wireless adsl2+ router
Table of Contents

Advertisement

2.4 System Requirements

Make sure your computer has a Networking Interface Card (either wired or wireless is ok)
before connecting the Router to your computer.
An operating system supporting the TCP/IP protocol.
Broadband Internet Access (ADSL).
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.

2.5 Installation Environment Requirements

The Router should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
Make sure the cables and power cord are placed safely out of the way so they do not create a
tripping hazard.
Designed to go up to 100 meters indoors and up to 300 meters outdoors for wireless
connection.
The Router can be placed on a shelf or desktop.
Operating temperature: 0℃~40℃ (32℉~104℉).
Operating Humidity: 10% ~ 90% RH Non-congealing.

2.6 Connecting the Router

Before installing the Router, please make sure your broadband service provided by your ISP is
available. If there is any problem, please contact with your ISP. After that, please install the
Router according to the following steps. Don't forget to pull out the power plug and keep your
hands dry.
1.
Locate an optimum location for the Router. The best place is usually near the center of the
area in which your PC will be wirelessly connected. The place had better accord with the
Installation Environment Requirements.
2.
Adjust the direction of the antenna. Normally, upright is a good direction.
3.
Connect your PC and Switch/Hub in your LAN to the LAN Ports of the Router. (If you have a
wireless NIC and want to have wireless connection, please skip this step.)
4.
Connect the telephone line to the Line port on the Router.
5.
Connect the DC power adapter to the DC power plug of the Router, and the other end into an
electrical outlet. The Router will start to work automatically.

2.6.1 The Best Location for Wireless Network Connection

The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
TD-W8920G
108M Wireless ADSL2+ Router User Guide
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Td-w8920gb

Table of Contents