TP-Link TD-W8920G User Manual page 27

WAN Port Information Table: This table describes the WAN port settings and the relevant
manipulation to each interface.
Remove: Select the check box in the table (shown in Figure 4-4) and then click the Remove
tab, the corresponding interface will be deleted in the table.
Add: Click the Add button, you can add a new interface in the next screen (shown in Figure
4-5).
Save/Reboot: If you are sure of the settings, choose Save/Reboot to apply the changes and
reboot the system.
Note:
You have to reboot to activate the WAN interface and further configuration services over this
interface. Click the Save/Reboot button to implement it.
Follow the instructions below to Add or Edit an ATM PVC
1. Click the Add button on the screen above (shown in Figure 4-4), then you will see the next
screen as follows (Figure 4-5):
TD-W8920G 108M Wireless ADSL2+ Router User Guide
Figure 4-4
20