HOMCOM 440-026 Manual page 21

CAUTION!
The height of the hitch clamp shall not exceed 15.5" (400
mm) above a road surface and the standard drawbar load
shall be between 30N and 80N. The hitch arm must not bear
any extra load.
WARNINGS!
Ensure the safety pin is secured with the spring clip. Please
ensure your bike is completely compatible with the trailer. The
safety strap must be in place before use.
If the hitch arm interferes with your bike or other bike
attachments, or if it does not tighten securely, do not use. Contact
your bike dealer for help with proper installation.
ATTACHING AND REMOVING STROLLER
The stroller conversion kit consists of a push bar and front
wheel assembly that attach on the trailer to convert it for
walking use.
Install the push bar by inserting ends into frame and pushing
down until locking devices snap into place. Insert the front
wheel assembly into the bracket and firmly tighten the knob.
20