Advertisement
Available languages
Available languages
ATTACHING THE REFLECTORS
Screw the reflectors on the top cover of trailer and the spoke
reflectors on both sides of wheels. Make certain to tighten
these screws securely.
CAUTION!
The reflectors that comply with the BS regulations shall be
.
visible on the rear of the trailer
WARNINGS!
Never use the vehicle at night without adequate lighting and
reflectors, obey all local laws for lighting and reflectors in
accordance with BS requirements. In order to meet BS Safety
Standards, a reflector must be in place on the tear of the trailer.
16
Advertisement
Need help?
Do you have a question about the 440-026 and is the answer not in the manual?
Questions and answers