Air King Exhaust Fan AKF55 Specifications

Air king exhaust fan 1350 watts - 70 cfm/5.0 sones 0.10" wg. hvi certified 120 volts, 11.2 amps, 60 hz.

Advertisement

• Grill
White, polymeric grill (flame retardant ABS UL rated 94-5V)
secured in place using 2 hex nuts that can be easily removed
if necessary, dimensions - 17
• Light Lens
Moonstone glass lens, installed in a flip down lens holder.
Secured in place using integral tabs.
• Blower Wheels
Heater blower wheel - one piece metal electronically balanced,
Ventilation blower wheel - one piece polymeric electronically
• Motors
Heater motor - Heavy duty, plug in 2 pole motor. Life time
lubrication, thermally protected.
Rated 120 volts, 60 hz., 0.90 amps., 2400 rpm.
Ventilation motor - Heavy duty, plug in 2 pole motor. Life time
lubrication, thermally protected.
Rated 120 volts, 60 hz., 1.2 amps.
• Heater Housing
23 gauge galvanized steel housing. Dimensions 14
• Heating Element
Ultra safe ceramic heating element bonded to large heat transfer
surface allows heating at very low operating temperature. Self
regulating design provides 1,350 Watts – 4,600 Btu.
• Duct Collar
Metal collar for 4" duct connection, comes complete with built
in back draft damper.
Air Flow - CFM
76
PROJECT
LOCATION
CONTRACTOR
FAN
MODEL
CFM
NUMBER NUMBER
C
US
Specifications subject to change without notice.
1350 watts - 70 CFM/5.0 SONES @ 0.10" wg.
HVI CERTIFIED 120 Volts, 11.2 amps, 60 hz.
1 / 8
" x 9
7 / 8
".
3
11 / 16
" x 2" with 28 fins.
balanced, 4
5 / 8
" x 1" with 10 fins.
1 / 2
" x 8
Static Pressure (inches of w.g.)
0
0.05
0.1
0.15
73
70
67
IN
RPM
WATTS
W.G.
6
1 / 2
"
9
CUL/HVI - TYPE IC RATED
• Ventilating Area
For bathrooms up to 70 sq. ft. For other rooms up to 85 sq. ft.
• Lamping Information
Electronic Quick Start Ballast – rated 26 Watt – Use Triple 4 pin
PL lamp. Maximum 26 Watt.
• Unit Mounting
Designed for ceilings insulated to R-40. Designed to mount in
3 / 8
" x 6
1 / 2
".
ceilings with at least 7.5" of clearance. The unit will mount
between joists (with 16" centers) or butted up against a joist.
The housing will mount through drywall thickness up to
with a rough in opening of 14
• Single Pack Shipping Info
Box Dim: 21
Shipping Weight: 16.09 lbs.
PERFORMANCE
0.2
0.25
0.3
64
61
57
ARCHITECT
ENGINEER
SUBMITTED BY
AMPS
SONES
QTY
U.S.: 820 Lincoln Drive
West Chester, Pennsylvania 19380-4466
Tel: (877)-304-3785
Fax: (610) 696-8048
SPECIFICATIONS
AKF55
EXHAUST FANS
14
1 / 2
"
7 / 8
"
17
1 / 8
"
3 / 4
" x 8
5 / 8
".
1 / 8
" x 11
1 / 4
" x 9
3 / 4
"
HVI Sones
Fan Speed
@ .1 SP
0.35
53
5.0
DATE
OPTIONAL EQUIPMENT
& REMARKS
Canada: 110 Glidden Road
Brampton, Ontario L6T 2J3
Tel: (905) 456-2033
Fax: (905) 456-1015
8
3 / 8
"
4"
3 / 4
",
Power
RPM
Watts
2575
54
Updated 5-06

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Exhaust Fan AKF55 and is the answer not in the manual?

Questions and answers

Elsie Gamarra
January 21, 2025

A few questions on the old Model AKF55: 1. How can I easily remove the door to the light? 2. What is the easiest way to line up to the (2) metal rails? Thank you.

1 comments:
Mr. Anderson
February 10, 2025

To remove the door to the light on the Air King Exhaust Fan AKF55, push in on the two tabs of the light lens and pull outward. The lens will swing open on the connector bars but should not be removed from the grill.

The easiest way to align the two metal rails is by ensuring that the posts on the grill line up with the holes in the light reflector when installing the light reflector into the grill.

This answer is automatically generated

This manual is also suitable for:

Akf55

Table of Contents