Advertisement
Available languages
Available languages
Step 12
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D581 and D582).
å
Fasten the EXTENSION SLIDES (40MC) to the DRAWER SIDES (D581 and D582). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Repeat this step for the other drawer.
3
4
www.sauder.com/commercial-office/service
Open end
1
2
D582
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D581
3
4
3S
427869
10A
Open end
1
2
Drawer Slide
Center the screw in the oval hole.
7
Page 17
Advertisement
