Related Manuals for ANTAIRA AMY-5133-AC-PD
Summary of Contents for ANTAIRA AMY-5133-AC-PD
- Page 1 AMY-5133-AC-PD Industrial IEEE 802.11 AC 5GHz Wireless AP/Client Bridge Hardware Manual Version 1.0 (June 2023)
- Page 2 Antaira Technologies, LLC will not be liable for any technical inaccuracies or typographical errors found in this guide. Changes are periodically made to the information contained herein and will be incorporated into later versions of the manual.
- Page 3 Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. Avertissement FCC Cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe A, conformément à la partie 15 des règles de la FCC.
- Page 4 Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 This document is the current official release hardware manual. Please check our website (www.antaira.com) for any updated manual or contact us by e-mail (support@antaira.com).
-
Page 5: Table Of Contents
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 Table of Contents 1 Overview 1.1 Product Hardware Features 1.2 Package Contents 1.3 Safety Precaution 2 Hardware Description 2.1 Physical Dimensions 2.2 Inside View Panel 2.3 LED Indicators 2.4 Reset Button... -
Page 6: Overview
AMY-5133-AC-PD - Hardware Manual - v1.0 1 Overview Antaira Technologies’ AMY-5133-AC-PD is a simple point to point or point to multipoint IEEE 802.11 radio with a gigabit PoE wired interface. The gigabit Ethernet IEEE 802.3af/at interface provides a means to power and deliver data making setup fast and clean. - Page 7 Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 Attention: Si la tension CC est fournie par un circuit externe, veuillez utiliser un dispositif de protection sur l'entrée d'alimentation. Les spécifications matérielles, les ports, les informations de câblage et l'installation du câblage du point d'accès sans fil industriel seront décrits dans ce manuel du matériel.
-
Page 8: Hardware Description
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 2 Hardware Description 2.1 Physical Dimensions Figure 2.1, below, shows the physical dimensions of this product: (W x D x H) is 87mm x 38mm x 260mm... -
Page 9: Inside View Panel
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 2.2 Inside View Panel Figure 2.2, below, shows the inside panel of the product: Figure 2.2 - Inside View Panel 2.3 LED Indicators There are LED light indicators located on the front panel of the industrial wireless access point that display the power status and network status. -
Page 10: Reset Button
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 Port linked LAN Port Blinking Data is transmitting or receiving data No link The wireless radio is on WLAN Blinking Data is transmitting or receiving over wireless The wireless radio is off 2.4 Reset Button... -
Page 11: Cabling
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 1 / TP0+ 3 / TP1+ 1 / TP0+ 1 / TP1+ 2 / TP0- 6 / TP1- 2 / TP0- 2 / TP1- 3 / TP1+... -
Page 12: Mounting Installation
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 3 Mounting Installation 3.1 Pole Mounting This unit has a pole mounting strap in the box. Place the mounting strap through the slot on the back of the device and then around the pole as shown on Figure 3.1. -
Page 13: Hardware Installation
Antaira Technologies - Industrial Wireless Access Points AMY-5133-AC-PD - Hardware Manual - v1.0 4 Hardware Installation 4.1 Installation Steps This section will explain how to install the industrial wireless access point: Installation Steps 1. Unpack the industrial wireless access point from the original packing box. -
Page 14: Troubleshooting
Check for loose power connections, power losses, or surges at the power outlet. ○ Please contact Antaira for technical support service if the problem still cannot be resolved. ● If the industrial switch LED indicators are normal and the connected cables are correct but the packets still cannot transmit, please check the system’s Ethernet devices’...
Need help?
Do you have a question about the AMY-5133-AC-PD and is the answer not in the manual?
Questions and answers