TP-Link TL-R488T User Manual page 88

Note:
If the above configuration takes effect, you should login the Router by typing in
http://192.168.1.1:88
the web browser.
Step 2: To add a WEB Server: Login to the router, click the menu Forwarding→Virtual Servers
on the left of your browser. On the Virtual Server screen, add a Virtual Server rule as
shown below. Configure "80" as the "Service Port", and enter your IP address (assuming
192.168.1.188 for an example), remember to "Enable" and "Save".
TL-R488T
(the router's LAN IP address: Web Management Port) in the address field of
Load Balance Broadband Router User Guide
Figure B-6
Figure B-7
83